Because I am always so critical of my own work, I always try to perfect everything I do. I made another Knights Templar helmet from recycled Coroplast®. This time I coated the inside in fiberglass and the outside in automotive body fill.
This is how I make the helmets - How to Make a Cosplay Crusader / Templar Helmet
It kind of defeats the entire recycling theme of these projects, but I just wanted to see if it could be done. What resulted is a strong and heavy cosplay helmet. Best of all because the exterior is so smooth it actually more closely resembles a real helmet.
|A Coroplast® Templar Helmet coated in a layer of body fill|
|It started to look pretty good after only one sanding|
|The cross added to the front and a few of the bad spots touched up|
Please check out our other sites - HalifaxSportsPhotos.ca Tippinators.com CoroplastCreations.com
|The breathing holes aren't drilled out, and no weathering nor rivets have been applied yet but it came out better than I expected|
|Let me know if you have any questions firstname.lastname@example.org||Photos courtesy of